pbm install 4.3 Packard Bell EasyNote

2 msg	ipsec.conf question

pbm install 4.3 Packard Bell EasyNote
\ xavier brinon (5 May 2008)

11 msg	Apache suexec problem
9 msg	1U IBM or Dell server for firewall
1 msg	gtk+2-2.12.7 on't upgrade after upgrade to 4.3
4 msg	colors in regular openbsd terminal
7 msg	problem building release for 4.3 stable
18 msg	Window Manager
2 msg	What tarball is xlib.h in in 4.3?
5 msg	newfs during install
1 msg	Mehr Insolvenzen in den USA
11 msg	Jack, sun and envy problem
5 msg	mknod fails after wrong arch MAKEDEV
3 msg	mplayer & snapshot install
7 msg	OpenBSD 4.3 and Xorg resolution 1280x800?
1 msg	Good news re: Flash9
37 msg	Doubt about license
2 msg	source/destination nat pf, user space filtering pf
61 msg	Editing C with...
2 msg	4.2, ppp problem

Subject:	pbm install 4.3 Packard Bell EasyNote
Group:	Openbsd-misc
From:	xavier brinon
Date:	5 May 2008

Hello to all,
The install of the 4.3 is quite difficult in comparison to the 4.2 (both
dmesg are attached to the mail)
the wifi is not properly recognised
The boot is processed completely 50% of the times. I mean each time I have
the ddb> prompt, I just reboot (boot reboot)
(see the dmesgko4.3 and the dmesgok4.3) and that second time it completes
I've attached also the trace and ps.

I reinstalled the 4.2 and all works fine,
4.3 stable is booting improperly half the time
and 4.3 -current also.

I stil can reboot my computer two times, and keep the ethernet cable instead
of my wifi, but any improvement is welcome

If anyone can help, thanks in advance.
0xe6000/0x1000! 0xeb000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xb0000000, size 0x8000000
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 7
ehci0: reset timeout
ehci0: init failed, error=13
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
rtw0 at pci1 dev 1 function 0 "Realtek 8180" rev 0x20: irq 11
rtw0: ver RTL8180F,
rtw0: could not recall EEPROM in 10000us

rtw0: could not recall EEPROM in 10000us
rl0 at pci1 dev 2 function 0 "Realtek 8139" rev 0x10: irq 3, address 00:40:d0:62:86:13
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST94019A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD+-RW SDW-082S, LX06> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 5
iic0 at ichiic0
iic0: addr 0x18 00=00 01=00 02=00 3e=00 4e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1b 00=00 01=00 3e=00 48=d0 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1e 00=00 01=00 3e=00 48=d0 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x21 00=00 01=00 02=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x24 00=00 01=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x26 00=00 01=00 02=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x29 00=00 01=00 02=00 03=00 04=00 3e=00 3f=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x2c 00=00 3e=00 3f=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x2f 00=00 01=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x4a 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x4d 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 5, ICH4 AC97
ac97: codec id not read
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask edf5 netmask edfd ttymask ffff
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
softraid0 at root
OpenBSD 4.3-current (GENERIC) #0: Sun Apr 27 22:32:03 CEST 2008
root:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR ,SSE,SSE2,TM,SBF
real mem = 234385408 (223MB)
avail mem = 218484736 (208MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xe97a0, SMBIOS rev. 2.3 @ 0xec31d (38 entries)
bios0: vendor Insyde Software Corporation version "R1.11" date 09/14/2004
bios0: NEC Computers International Packard Bell EasyNote
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP BOOT DBGP
acpi0: wakeup devices SBTN(S4) LAN_(S3) USB0(S3) USB1(S3) USB3(S3) AC97(S3) MC97(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 1 (PCI2)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0: Failed to register address space
acpicpu0 at acpi0: C3, C2
acpibtn0 at acpi0: SBTN
acpiac0 at acpi0: AC unit offline
acpibtn1 at acpi0: LID_
acpibat0 at acpi0: BAT0 not present
bios0: ROM list: 0xc0000/0xcc00! 0xe0000/0x1800 0xe6000/0x1000! 0xeb000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xb0000000, size 0x8000000
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 7
ehci0: reset timeout
ehci0: init failed, error=13
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
rtw0 at pci1 dev 1 function 0 "Realtek 8180" rev 0x20: unable to map device registers
rl0 at pci1 dev 2 function 0 "Realtek 8139" rev 0x10: irq 3, address 00:40:d0:62:86:13
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST94019A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD+-RW SDW-082S, LX06> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 5
iic0 at ichiic0
iic0: addr 0x18 00=00 01=00 02=00 03=00 48=d0 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1a 00=00 3e=00 48=d0 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1c 00=00 01=00 48=d0 49=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1f 3e=00 48=d0 words 00=ffff 01=ffff 02=ffff 03=0000 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x21 00=00 3e=00 3f=00 4e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x23 00=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x26 00=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x29 00=00 01=00 02=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x2c 00=00 01=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=0000 04=ffff 05=ffff 06=0000 07=ffff
iic0: addr 0x2f 00=00 01=00 words 00=ffff 01=ffff 02=ffff 03=0000 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x49 00=00 01=00 words 00=0000 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x4b 00=00 words 00=0000 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x4d 00=00 01=00 3e=00 words 00=0000 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 5, ICH4 AC97
ac97: codec id not read
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask edf5 netmask edfd ttymask ffff
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
clock: unknown CMOS layout
syncing disks...
OpenBSD 4.2 (RAMDISK_CD) #468: Tue Aug 28 11:02:17 MDT 2007
deraadt:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR ,SSE,SSE2,TM,SBF
real mem = 234385408 (223MB)
avail mem = 220565504 (210MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xe97a0, SMBIOS rev. 2.3 @ 0xec31d (38 entries)
bios0: vendor Insyde Software Corporation version "R1.11 " date 09/14/2004
bios0: NEC Computers International Packard Bell EasyNote
pcibios0 at bios0: rev 2.1 @ 0xe7000/0x691
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xcc00! 0xe0000/0x1800 0xe6000/0x1000! 0xeb000/0x5000!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
rtw0 at pci1 dev 1 function 0 "Realtek 8180" rev 0x20: unable to map device registers
rl0 at pci1 dev 2 function 0 "Realtek 8139" rev 0x10: irq 3, address 00:40:d0:62:86:13
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST94019A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD+-RW SDW-082S, LX06> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801DB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
"Intel 82801DB AC97" rev 0x03 at pci0 dev 31 function 5 not configured
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fff5 netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
deraadt:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR ,SSE,SSE2,TM,SBF
real mem = 234385408 (223MB)
avail mem = 218935296 (208MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xe97a0, SMBIOS rev. 2.3 @ 0xec31d (38 entries)
bios0: vendor Insyde Software Corporation version "R1.11 " date 09/14/2004
bios0: NEC Computers International Packard Bell EasyNote
pcibios0 at bios0: rev 2.1 @ 0xe7000/0x691
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xcc00! 0xe0000/0x1800 0xe6000/0x1000! 0xeb000/0x5000!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at 0xb0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
rtw0 at pci1 dev 1 function 0 "Realtek 8180" rev 0x20: unable to map device registers
rl0 at pci1 dev 2 function 0 "Realtek 8139" rev 0x10: irq 3, address 00:40:d0:62:86:13
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST94019A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD+-RW SDW-082S, LX06> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 5
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 5, ICH4 AC97
ac97: codec id not read
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask eff5 netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
clock: unknown CMOS layout

[demime 1.01d removed an attachment of type application/octet-stream which had a name of dmesg4.3AfterInstall]

[demime 1.01d removed an attachment of type application/octet-stream which had a name of dmesgcurrent.4.3]
OpenBSD-current (GENERIC) #0: SUN APR 27 22:32:03 CEST 2008
root:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR ,SSE,SSE2,TM,SBF
real mem = 234385408 (223MB)
avail mem = 218484736 (208MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xe97a0, SMBIOS rev. 2.3 @ 0xec31d (38 entries)
bios0: vendor Insyde Software Corporation version "R1.11" date 09/14/2004
bios0: NEC Computers International Packard Bell EasyNote
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP BOOT DBGP
acpi0: wakeup devices SBTN(S4) LAN_(S3) USB0(S3) USB1(S3) USB3(S3) AC97(S3) MC97(S3)
acpitimer0 at acpi0:3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 1 (PCI2)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0: Failed to register address space
acpicpu0 at acpi0: C3, C2
acpibtn0 at acpi0: SBTN
acpiac0 at acpi0: AC unit offline
acpibtn1 at acpi0: LID_
acpibat0 at acpi0: BAT0 not present
bios0 : ROM list: 0xc0000/0xcc00! 0xe0000/0x1800 0xe6000/0x1000! 0xeb000/0x5000!
cpu0 at mainbus0
pic0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: onsole (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xb0000000, size 0x8000000
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 7
ehci0: init failed, error=13
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus1
rtw0 at pci1 dev 1 function "Realtek 8180" rev 0x20: irq 11
rtw0: ver RTL8180F,
rtw0: could not recall EEPROM in 10000us

rtw0: could not recall EEPROM in 10000us
rl0 at pci1 dev 2 function 0 "Realtek 8139" rev 0x10: irq3, address 00:40:d0:62:86:13
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibily, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST94019A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
atapiscsi at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD+-RW SDW-082S, LX06> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 5
iic0 at ichiic0
iic0: addr 0x18 00=00 01=00 02=00 3e=00 4e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1b 00=00 01=00 3e=00 48=d0 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1e 00=00 01=00 3e=00 48=d0 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x21 00=00 01=00 02=00 3e=00 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x24 00=00 01=00 3e=00 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x26 00=00 01=00 02=00 3e=00 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x29 00=00 01=00 02=00 03=00 04=00 3e=00 3f=00 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x2c 00=00 3e=00 3f=00 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x2f 00=00 01=00 3e=00 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x4a 3e=00 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x4d 3e=00 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 5, ICH4 AC97
ac97: codec id not read
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard,using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask edf5 netmask edfd ttymask ffff
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
softraid0 at root
uvm_fault(0xd07f3d20, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at _bus_dmamap_load+0xe: cmpl 0(%ebx),%esi
ddb> panic: wdc_exec_command: polled command not done
Stooped at Debugger+0x4: leave
OpenBSD 4.3-current (GENERIC) #0: Sun Apr 27 22:32:03 CEST 2008
root:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR ,SSE,SSE2,TM,SBF
real mem = 234385408 (223MB)
avail mem = 218484736 (208MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xe97a0, SMBIOS rev. 2.3 @ 0xec31d (38 entries)
bios0: vendor Insyde Software Corporation version "R1.11" date 09/14/2004
bios0: NEC Computers International Packard Bell EasyNote
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP BOOT DBGP
acpi0: wakeup devices SBTN(S4) LAN_(S3) USB0(S3) USB1(S3) USB3(S3) AC97(S3) MC97(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 1 (PCI2)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0: Failed to register address space
acpicpu0 at acpi0: C3, C2
acpibtn0 at acpi0: SBTN
acpiac0 at acpi0: AC unit offline
acpibtn1 at acpi0: LID_
acpibat0 at acpi0: BAT0 not present
bios0: ROM list: 0xc0000/0xcc00! 0xe0000/0x1800 0xe6000/0x1000! 0xeb000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xb0000000, size 0x8000000
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 7
ehci0: reset timeout
ehci0: init failed, error=13
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
rtw0 at pci1 dev 1 function 0 "Realtek 8180" rev 0x20: irq 11
rtw0: ver RTL8180F,
rtw0: could not recall EEPROM in 10000us

rtw0: could not recall EEPROM in 10000us
rl0 at pci1 dev 2 function 0 "Realtek 8139" rev 0x10: irq 3, address 00:40:d0:62:86:13
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST94019A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD+-RW SDW-082S, LX06> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 5
iic0 at ichiic0
iic0: addr 0x18 00=00 01=00 02=00 3e=00 4e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1b 00=00 01=00 3e=00 48=d0 words 00=ffff 01=0000 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1e 00=00 01=00 3e=00 48=d0 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x21 00=00 01=00 02=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x24 00=00 01=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x26 00=00 01=00 02=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x29 00=00 01=00 02=00 03=00 04=00 3e=00 3f=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x2c 00=00 3e=00 3f=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x2f 00=00 01=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x4a 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x4d 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 5, ICH4 AC97
ac97: codec id not read
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask edf5 netmask edfd ttymask ffff
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
softraid0 at root
OpenBSD 4.3-current (GENERIC) #0: Sun Apr 27 22:32:03 CEST 2008
root:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR ,SSE,SSE2,TM,SBF
real mem = 234385408 (223MB)
avail mem = 218484736 (208MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xe97a0, SMBIOS rev. 2.3 @ 0xec31d (38 entries)
bios0: vendor Insyde Software Corporation version "R1.11" date 09/14/2004
bios0: NEC Computers International Packard Bell EasyNote
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP BOOT DBGP
acpi0: wakeup devices SBTN(S4) LAN_(S3) USB0(S3) USB1(S3) USB3(S3) AC97(S3) MC97(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 1 (PCI2)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0: Failed to register address space
acpicpu0 at acpi0: C3, C2
acpibtn0 at acpi0: SBTN
acpiac0 at acpi0: AC unit offline
acpibtn1 at acpi0: LID_
acpibat0 at acpi0: BAT0 not present
bios0: ROM list: 0xc0000/0xcc00! 0xe0000/0x1800 0xe6000/0x1000! 0xeb000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xb0000000, size 0x8000000
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 7
ehci0: reset timeout
ehci0: init failed, error=13
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
rtw0 at pci1 dev 1 function 0 "Realtek 8180" rev 0x20: unable to map device registers
rl0 at pci1 dev 2 function 0 "Realtek 8139" rev 0x10: irq 3, address 00:40:d0:62:86:13
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST94019A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD+-RW SDW-082S, LX06> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 5
iic0 at ichiic0
iic0: addr 0x18 00=00 01=00 02=00 03=00 48=d0 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1a 00=00 3e=00 48=d0 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1c 00=00 01=00 48=d0 49=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x1f 3e=00 48=d0 words 00=ffff 01=ffff 02=ffff 03=0000 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x21 00=00 3e=00 3f=00 4e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x23 00=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x26 00=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x29 00=00 01=00 02=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x2c 00=00 01=00 3e=00 words 00=ffff 01=ffff 02=ffff 03=0000 04=ffff 05=ffff 06=0000 07=ffff
iic0: addr 0x2f 00=00 01=00 words 00=ffff 01=ffff 02=ffff 03=0000 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x49 00=00 01=00 words 00=0000 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x4b 00=00 words 00=0000 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
iic0: addr 0x4d 00=00 01=00 3e=00 words 00=0000 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 5, ICH4 AC97
ac97: codec id not read
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask edf5 netmask edfd ttymask ffff
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
clock: unknown CMOS layout
PID PPID PGRP UID S FLAGS WAIT COMMAND
9 0 0 0 3 0x100200 ptfm pfpurge
8 0 0 0 3 0x100200 usbevt usb1
7 0 0 0 3 0x100200 usbtsk usbtask
6 0 0 0 3 0x100200 usbevt usb0
5 0 0 0 3 0x100200 acpi_idle acpi0
4 0 0 0 3 0x100200 bored syswq
* 3 0 0 0 3 0x100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 0 0 3 0 initexec swapper
0 -1 0 0 3 0x80200 biowait swapper
Debugger(50,d0685891,d762eb20,d58ee060,d762eb48) at debugger+0x4
panic(d0685820,d58ee060,64,0,1) at panic+0x63
wdc_exec_command(d0d6f0d8,d762eb48,d762eb70,d02e3304) at wdc_exec_command+0x105
wd_flushcache(d0d6d000,10,d762eba0,d07ec0c0,4100) at wd_shutdown+0x10
dohooks(d0794dc0,1,d762ec00,d0322251) at dohooks+0x6b
boot(480c,1,2850,0,0) at boot+0x67
db_boot_reboot_cmd(d0484866,0,ffffffff,d762ec28,d0792e00) at db_command+0xff
db_command_loop(0,d762edb8,d762ed70,d048026b,6) at db_command_loop+0x8a
db_trap(6,0,d762ed60,d035b7a9,a) at db_trap+0x90
kdb_trap(6,0,d762edb8,0) at kbd_trap+0xab
trap() at trap+0x95
--- trap (number 6) ---
_bus_dmamap_load(d07a2ba0,0,d5e2f000,200,0,1,4000,1519) at _bus_dmamap_load+0xe
pciide_dma_init(d0d6f000,0,0,d5e2f000,200,1,c6,d762ee80) at pciide_dma_init+0x4f
_wdc_ata_bio_start(d0d6f0ac,d58ee000,40,0,d07950d0) at _wdc_ata_bio_start+0x249
wdc_ata_ctrl_intr(d0d6f0ac,d58ee000,1,d762ef14) at wdc_ata_ctrl_intr_+0x18f
wdcintr(d0d6f0ac) at wdcintr+0x8b
Xrecurse_legacy14() at Xrecurse_legacy14+0xb1
--- interrupt ---
cpu_idle_cycle(d08a3100) at cpu_idle_cycle+0xf
Bad frame pointer: 0xd0937e78