network dysfunction - ReadList.com

1 msg	Possible bug in 4.99.62 at the poweroff time
5 msg	crash in today's kernel: uvm_fault() in vfs_busy()
1 msg	new permission problem in full build
7 msg	i386 acpi panci
3 msg	MFS panic
2 msg	resize kills -current
3 msg	rpc.lockd
3 msg	locale LC_NUMERIC
4 msg	NetBSD on sd0 (memory) and CGD on wd0... succes...
2 msg	-current panics with mount_null(8)
3 msg	troubles with ipnat TCP entries
5 msg	Moving usr into cgd -- is it ok if i use 'cp -p...
4 msg	-current not building: prop_array.o
3 msg	file system problems
7 msg	LOCKDEBUG panic when hitting the shutdown button
1 msg	build.sh ... release failed on amd64
7 msg	NetBSD in a camera
4 msg	'locking against myself' with sysmon_envsys/lib...

network dysfunction
\ comfooc (5 May 2008)
. \ comfooc (6 May 2008)
. . \ Juan RP (6 May 2008)
. \ comfooc (8 May 2008)
. . \ Andrew Doran (8 May 2008)
. . . \ comfooc (8 May 2008)

4 msg	By the way - was Re: Change from BSDL to GPL?

Subject:	network dysfunction
Group:	Netbsd-current-users
From:	comfooc
Date:	5 May 2008

Hi,
I've just installed NetBSD-daily/HEAD/200804300000Z/i386 and I'm
experiencing few network related problems.

First I need to say that I'm using PC-Card ep0 network interface which
is detected properly by kernel and it is configured by dhcp correct.
While the above is ok, first issue appears when I'm pulling out my
card from slot, kernel do not report this (no info, no reaction). Also
inserting new card is not reported by kernel. (I think that it might
be caused by lack of PCI_BUS_FIXUP option in GENERIC kernel).

Second (the major) issue is that the network activity is suspended
after few seconds (bytes) of transfer. Transfer just freezes.

All this time system is working and functional.

Cheers and thanks for help!

dmesg with "working" ep0:

NetBSD 4.99.62 (GENERIC) #0: Thu May 1 11:01:31 UTC 2008
builds:/home/builds/ab/HEAD/i386/200804300000Z-obj/home/builds/ab/HEAD/src/sys/a rch/i386/compile/GENERIC
total memory = 191 MB
avail memory = 176 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
IBM 260961G (Not Available)
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 497.85 MHz, id 0x683
cpu0: features 387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 387f9ff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0683-0001-E0F1-9FC1-0F7E
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: 8 page colors
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20080321
acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000>
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 11
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKB: ACPI: Found matching pin for 0.10.INTA at func 0: 9
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKC: ACPI: Found matching pin for 0.11.INTA at func 0: 10
LNKD: ACPI: Found matching pin for 0.12.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
DMAA (PNP0200) [AT DMA Controller] at acpi0 not configured
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
MEM1 (PNP0C01) [System Board] at acpi0 not configured
MEM2 (PNP0C02) [Plug and Play motherboard register resources] at acpi0
not configured
EPP (PNP0400) [Standard LPT printer port] at acpi0 not configured
FDC (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUE, IBM3781): aux port
pckbc2: irq 12
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
PCR0 (ACPI Object Type 'Power' [0x0b]) at acpi0 not configured
acpibut0 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A): ACPI Battery (Control Method)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
PFAN (ACPI Object Type 'Power' [0x0b]) at acpi0 not configured
FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 60.0C active cooling
level 1: 66.0C critical 100.0C passive 49.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443MX Host Bridge/Controller (rev. 0x01)
Intel 82443MX PCI-ISA Bridge (miscellaneous bridge, revision 0x01) at
pci0 dev 7 function 0 not configured
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82440MX IDE controller (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82443MX USB Host Controller (rev. 0x00)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3
piixpm0: Intel 82443MX Power Management Controller (rev. 0x00)
piixpm0: interrupting at SMI
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 9 function 0: Silicon Motion LynxEM+ (rev. 0xa0)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
cbb0 at pci0 dev 10 function 0: Texas Instruments PCI1211 PCI-CardBus
Bridge (rev. 0x00)
clct0 at pci0 dev 11 function 0: Cirrus Logic CS4281 CrystalClear
Audio Interface (rev. 0x01)
clct0: interrupting at irq 10
clct0: ac97: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC,
Crystal Semi 3D
clct0: ac97: ext id 200<AMAP>
audio0 at clct0: full duplex, independent
ath0 at pci0 dev 12 function 0
ath0: interrupting at irq 11
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 7.8 phy 4.5 radio 5.6
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x21000
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb0: interrupting at irq 9
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
isa0 at mainbus0
lpt0 at isa0 port 0x378-0x37b irq 7
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
acpibat0: battery info: SANYO, LION, BQ2040
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ep0 at pcmcia0 function 0: <3Com, Megahertz 574B, B, 001>
ep0: address 00:50:da:e5:42:e7, 64KB word-wide FIFO, 1:1 Rx:Tx split
tqphy0 at ep0 phy 0: 78Q2120 10/100 media interface, rev. 10
tqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ep0: WARNING: powerhook_establish is deprecated
wd0 at atabus0 drive 0: <IBM-DARA-212000>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 11508 MB, 24941 cyl, 15 head, 63 sec, 512 bytes/sect x 23569967 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/2.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, 1.00>
disk removable
sd0: fabricating a geometry
sd0: 3832 MB, 3832 cyl, 64 head, 32 sec, 512 bytes/sect x 7847936 sectors
sd0: fabricating a geometry