Re: Cisco 7965 SIP Firmware

10 msg	interrupting MOH
3 msg	Realtime MOH
3 msg	Unicall + incomplete DNIS on international calls
21 msg	Need some input for Quad T1 and channel banks.

Cisco 7965 SIP Firmware
\ Razza (31 Mar 2008)
. \ J. Oquendo (31 Mar 2008)
. . \ Razza (31 Mar 2008)
. . . \ Greg Oliver (31 Mar 2008)
. . . . \ Razza (1 Apr 2008)
. . . . . \ Razza (2 Apr 2008)

2 msg	Gentilini, Paul is out of the office.
7 msg	Re: How to give user a prompt before connecting...
2 msg	Control of RTP open ports
1 msg	CDR Timestamps (cdr-custom)
1 msg	How to give user a prompt before connecting the...
5 msg	Re: PRI cards, Digium vs. Sangoma
2 msg	AsterPas ObjectPascal Based FastAGI Server goes...
1 msg	SIP proxy screwing up peer addresses.
6 msg	Simple Question
2 msg	Re: asterisk-users Digest, Vol 44, Issue 104
1 msg	Problem with VoiceMailMain
1 msg	Re: Tests in VMWare (was: Re:asterisk-users Dig...
1 msg	How to customize voicemail greeting
1 msg	transfer call
8 msg	UK FXO hangup detection with a twist

Subject:	Re: Cisco 7965 SIP Firmware
Group:	Asterisk-users
From:	Greg Oliver
Date:	31 Mar 2008

On Mon, 2008-03-31 at 23:07 +0100, Razza wrote:
> On 31/03/2008, J. Oquendo <sil> wrote:
> YMMV Change to reflect your firmware (e.g. P003-07-4-xx)
>
> 8<-------- SNIP -------->8
>
> I removed the following lines:
> <loadInformation8 model="IP Phone
> 7940">P003-07-4-00</loadInformation8>
> <loadInformation7 model="IP Phone
> 7960">P003-07-4-00</loadInformation7>
>
> And tried both of these:
> <loadInformation6 model="IP Phone
> 7965">term65.default</loadInformation6>
> and
> <loadInformation6 model="IP Phone
> 7965">SIP45.8-3-4SR1S</loadInformation6>
>
> But again I get no further than /var/log/messages showing in.tftp
> stops sending after XMLDefault.cnf.xml
>
> Any suggestions?

For a 7965, you might try loadinformation to be 335.. I have had to
match up CCM tk.prod values to match on newer phones in the past to be
what cisco uses in their internal database before I could get them to
work. Although, leaving those lines out completely will work as well
assuming they already have the SIP firmware loaded..

-Greg

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users