Re: Increasing the voice volume for digium card

2 msg	Voicemail Question
1 msg	VOIP Users Conference for Friday Dec 7 @ 12 Noo...
9 msg	CDR Function in Hangup Channel
6 msg	Probems receiving 200ok message
4 msg	Setting Multiple Values via func_odbc ...?
6 msg	Dial() Macro option error in 1.4.15
7 msg	Setting custom field in CDR
13 msg	Cisco power injector with GXP2000 phones
3 msg	Logging in and off sessions in the dialplan

Re: Increasing the voice volume for digium card
\ bilal ghayyad (6 Dec 2007)

5 msg	Call Center Scenario -- take 2
1 msg	IVR problem (Trixbox)
5 msg	Play Beep instead of MOH
2 msg	Re: Increasing the voice volume from the digium...
5 msg	DeadAgi
1 msg	Polycom call drops
4 msg	GSM and CDMA Gateways
1 msg	C&W ISDN110
1 msg	Re: Can Asterix seperate the signalling and the...
3 msg	Running AGI script if condition met?

Subject:	Re: Increasing the voice volume for digium card
Group:	Asterisk-users
From:	bilal ghayyad
Date:	6 Dec 2007

In the rxgain and txgain or fxs_rx and fxs_tx?

And what is the utilization of ztmonitor in this case?

Regards
Bilal

---------------

Hi there,

Have you mentioned to the last email by Matthew? He
told you can
achieve what you need through setting rxgain and
txgain for each channel in
zapata.conf (It means you have control each channel
seperatly even on a
card)

Regards.
--
M. Shokuie Nia,
SENA CO.

> Date: Thu, 6 Dec 2007 03:52:04 -0800
> From: bilmar_gh
> To: asterisk-users
> CC: creslin
> Subject: Re: [asterisk-users] Increasing the voice
volume from the
digium card
>
> Dears;
>
> I have one TMA22B card, I need to increase the
volume
> on the caller side (the voice that come from
asterisk
> to caller, while caller is using his mobile by
dialing
> to asterisk to the fxo port), these ports are the
3rd
> and 4th ports.
>
> Do I have to run:
>
> /usr/src/asterisk-1.4/zaptel-1.4/ztmonitor 3 -vv
> and:
> /usr/src/asterisk-1.4/zaptel-1.4/ztmonitor 4 -vv
>
> Also, what should I write in my zapata.conf file?
The
> fxs_rx: ? Is it to be the Rx reading of the previous
> commands or more if I need to increase the voice
> volume?
>
> What if I have another TDM22B card, and I need to
> increase the voice volume at port 3 and 4 of that
> second card, what the attribute to be bypass for the
> above commands?
>
> Your kindly help is high appreciated.
> Regards
> Bilal
>
> bilal ghayyad wrote:
>> Hi List;
>>
>> Anyone knows a method (command) to increase the
> voice
>> volume at diguim card level?
>
> Are you trying to do this at some other level than
> rxgain and txgain
> settings in zapata.conf?
>
> If so, for the analog cards there are some module
> parameters for doing
> so. For digital T1/E1 cards, the only way to do it
is
> with the gain
> options in zapata.conf.
>
> --
> Matthew Fredrickson
> Software/Firmware Engineer
> Digium, Inc.
>
> ----------------------
>
> ------------------------
> In zapata.conf you can add rxgain and txgain
settings
> and use
> ztmonitor to get it set. There are some more details
> on this on
> voip-info.org.
>
> On Nov 29, 2007 1:49 AM, bilal ghayyad
> wrote:
>> Hi All;
>>
>> I have an IP Trunk established between Asterisk and
>> the VoIP service provider, when call from my mobile
> to
>> the PBX and then enter the destination number to
> call
>> via the VoIP, I got a connection but the voice
level
>> volume need to be increased, I am trying to find if
>> zaptel (diguim card) can increase the volume (if
> there
>> is any command can do that)? And if that volume
> level
>> is possible to be applied only for that IP Trunk
and
>> not for others.
>>
>> Any Help?
>> Regards
>> Bilal

________________________________________________________________________________ ____
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users