Re: Correct voltages but no dial tone on TDM2400P

3 msg	Astribank + AsteriskNOW
3 msg	flooded by 'Maximum trunk data space exceeded'm...
5 msg	Faxing with Asterisk & SpanDSP [Was Fax Pro...
4 msg	G.729 required for IP<--->TDM<--->IP
2 msg	segfault - asterisk crash and restart
10 msg	PRI commands missing...
1 msg	Jamshed Zaidi wants to chat
6 msg	PRI over T1 calls dropping, cause 100
10 msg	MySQL() timeout

Correct voltages but no dial tone on TDM2400P
\ Alex R Green (30 Oct 2007)
. \ Mark Michelson (30 Oct 2007)
. \ Alex R Green (31 Oct 2007)
. \ Tilghman Lesher (31 Oct 2007)

1 msg	Re: sometimes calls drop during attended transfer
2 msg	G.729 transcoder beetween asterisk to avaya
6 msg	zoiper iax registation: 'facility rejected'
1 msg	iax register gets 'facility rejected'
8 msg	Re: Fax Problems with SpanDSP
4 msg	chan_mobile
1 msg	VoIP <-> PSTN Recommendations.
3 msg	Size of Exten when using IAX
1 msg	Re: Chanspy or Extenspy
1 msg	Bad Request

Subject:	Re: Correct voltages but no dial tone on TDM2400P
Group:	Asterisk-users
From:	Tilghman Lesher
Date:	31 Oct 2007

On Tuesday 30 October 2007 18:22:21 Alex R Green wrote:
> The TDM2400P card has three green FXS modules close to the 50pin
> connector and three red FXO modules at the rear. The card was installed
> in the system prior to loading Trixbox. I think the card is working:
> zaptel.conf was set up correctly with the first 12 channels fxsks and
> the last 12 channels fxo kewlstart.

Your signalling is backwards. The first 12 channels are fxs modules,
but they are signalled with fxo signalling, so fxoks=1-12, and the last
12 are fxo modules, but they are signalled with fxs signalling, so
fxsks=13-24. Ditto for zapata.conf.

--
Tilghman

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users